Diff for "ScannerSyncMatlab" - MRC CBU Imaging Wiki
location: Diff for "ScannerSyncMatlab"
Differences between revisions 1 and 13 (spanning 12 versions)
Revision 1 as of 2009-02-25 09:58:32
Size: 1976
Editor: RhodriCusack
Comment:
Revision 13 as of 2015-08-28 14:39:28
Size: 5573
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= Using ScannerSync from Matlab = #####
Line 3: Line 3:
NB - as of early 2015, the method of using scanner sync in matlab has changed. The new method uses Tibor's ScannerSynchClass rather than Rhodri's MRISync / ScannerSync software,

#####



= Using ScannerSync from Matlab - NEW METHOD =
= Using ScannerSync from Matlab - OLD METHOD =
Line 7: Line 15:
{{ {{{
Line 10: Line 18:
numdummies=8;  numdummies=8;
Line 15: Line 23:
invoke(objSS,'SetMSPerSample',2); %Set StartExperiment routines’ sampling 
}}
invoke(objSS,'SetMSPerSample',2); %Set StartExperiment routines’ sampling
}}}
Line 20: Line 27:
{{ {{{
Line 23: Line 30:
}} }}}
Wait for dummies (one less as StartExperiment command above will already have heard a pulse)
Line 25: Line 33:
Wait for dummies (one less as StartExperiment command above will already have heard a pulse)
{{
{{{
Line 33: Line 40:
end;
}}
end;
}}}
In your trial loop, you'll need to spend some of the time listening for pulses
Line 36: Line 44:
In your trial loop, you'll need to spend some of the time listening for pulses
{{
{{{
Line 39: Line 46:
}} }}}
You should dump out the timing of critical events and the measured TR
Line 41: Line 49:
You should dump out the timing of critical events and the measured TR
{{
{{{
Line 47: Line 54:
}}}
Also, for some designs you may want to occasionally synchronise your trials to the scanner
Line 48: Line 57:
}} {{{
    invoke(objSS,'SynchroniseExperiment',1,0); % 1= force wait for actual pulse; 0=return this many ms after pulse
}}}
== Using pretend mode ==
If you'd like to test code on a machine without the card, you may use a feature of ScannerSync called "pretend mode". To do this:
Line 50: Line 63:
Also, for some designs you may want to occasionally synchronise your trials to the scanner
{{
    invoke(objSS,'SynchroniseExperiment',1,0); % 1= force wait for actual pulse; 0=return this many ms after pulse
}}
(1) When in pretend mode, don't do "Initialise", and instead issue a "SetPretendMode" command. So change the first block to something like

{{{
pretendmode=1;
% Create & initialise scanner sync object
objSS=actxserver('MRISync.ScannerSync'); %Create a scanner object
if (~pretendmode)
  invoke(objSS,'Initialize','') %Initialise the Keithley board and object
else
  invoke(objSS,'SetPretendMode',1)
end;
invoke(objSS,'SetMSPerSample',2); %Set StartExperiment routines’ sampling
}}}
(2) You'll then see a warning message when you get to the "StartExperiment" command, to which you should click "OK". If you're using the PsychToolbox and have already set up the screen, make sure that you only use the HideCursor command after the StartExperiment command, otherwise you won't be able to click OK.

If you would like to use the button box in the practice room of the Scanner building, you will need this code instead to make the button box work:

{{{
pretendmode=1;
% Create & initialise scanner sync object
objSS=actxserver('MRISync.ScannerSync'); %Create a scanner object
if (~pretendmode)
  invoke(objSS,'Initialize','') %Initialise the Keithley board and object
else
  invoke(objSS,'SetPretendModeExtended',1,0)
  invoke(objSS,'Initialize','') %Initialise the Keithley board and object
end;
invoke(objSS,'SetMSPerSample',2); %Set StartExperiment routines’ sampling
}}}
== Collecting Responses ==
To collect responses in matlab using the button box add a code similar to this:

{{{
 tic
 resp=0;
 gotresp=false;
   while toc<rt_window
      if (~gotresp)
         resp=bitand(30,invoke(objSS,'GetResponse'));
         if (resp==samekey || resp==diffkey)
            gotresp=true;
         end;
       end;
    end;
}}}
This will collect the responses made by the subject during a pre-defined time interval (rt_window). You can also need to define which buttons the subject should press (in this example they are called samekey and diffkey). The codes returned by pressing the buttons are 28, 26, 22, 14 (i.e. when the right hand is placed on the button box and the subject used his index finger the code returned will be 28).

The GetResponse() function will by default only return first four button presses. If there is a need to use more than 4 buttons one could use GetResponseExtended() or ReadPIOValue(). The example below uses the latter function and ignores responses 254 and 255, which relate to no-response events.

{{{
 tic
 resp=0;
 gotresp=false;
 while toc<rt_window
    if (~gotresp)
       resp=invoke(objSS,'ReadPIOValue');
       if isempty(intersect([255,254],resp))
          gotresp=true;
       end;
    end;
 end;
}}}
== Collecting Response Times ==
To collect RTs you could try the following:

{{{
resp=0;
gotresp=false;
respstarttime=invoke(objSS,'SSGetTimer');
tic
   while toc<rt_window
      if (~gotresp)
         resp=bitand(30,invoke(objSS,'GetResponse'));
         if (resp==samekey || resp==diffkey)
            rt=invoke(objSS,'SSGetTimer')-respstarttime; %or alternatively you can set rt=toc
            gotresp=true;
         end;
       end;
    end;
}}}

NB - as of early 2015, the method of using scanner sync in matlab has changed. The new method uses Tibor's ScannerSynchClass rather than Rhodri's MRISync / ScannerSync software,

Using ScannerSync from Matlab - NEW METHOD

Using ScannerSync from Matlab - OLD METHOD

Make sure you have the ScannerSync control installed.

Somewhere near the top of your code, set up ScannerSync & initialise communication with the input-output board (will not work if you're using a machine without the board, e.g., not the mimic or stim delivery machines).

%% SCANNERSYNC
TR=1000; % TR in ms
numdummies=8;

% Create & initialise scanner sync object
objSS=actxserver('MRISync.ScannerSync');  %Create a scanner object
invoke(objSS,'Initialize','') %Initialise the Keithley board and object
invoke(objSS,'SetMSPerSample',2); %Set StartExperiment routines’ sampling

Now, wait for first pulse from scanner. Also, tell ScannerSync the approximate TR.

% ScannerSync - waits for the first pulse, resets timer to 0, sets TR
invoke(objSS,'StartExperiment', double(TR));

Wait for dummies (one less as StartExperiment command above will already have heard a pulse)

for countdown=(numdummies-1):-1:1
    count_text=sprintf('%d', countdown);
  % uncomment the next two if you're using the PsychToolbox
%    DrawFormattedText(window, count_text, 'center', 'center', white);
%    Screen(window, 'Flip');
    invoke(objSS,'SynchroniseExperiment',1,0); %  1= force wait for actual pulse; 0=return this many ms after pulse
end;

In your trial loop, you'll need to spend some of the time listening for pulses

    invoke(objSS,'CheckPulseSynchronyForTime', double(500)); % spend 500 ms listening for any pulses

You should dump out the timing of critical events and the measured TR

    picstarttime=invoke(objSS,'SSGetTimer');
    measuredTR=invoke(objSS,'GetMeasuredTR');

% ...add your own code to write these to your output file

Also, for some designs you may want to occasionally synchronise your trials to the scanner

    invoke(objSS,'SynchroniseExperiment',1,0); %  1= force wait for actual pulse; 0=return this many ms after pulse

Using pretend mode

If you'd like to test code on a machine without the card, you may use a feature of ScannerSync called "pretend mode". To do this:

(1) When in pretend mode, don't do "Initialise", and instead issue a "SetPretendMode" command. So change the first block to something like

pretendmode=1;
% Create & initialise scanner sync object
objSS=actxserver('MRISync.ScannerSync');  %Create a scanner object
if (~pretendmode)
  invoke(objSS,'Initialize','') %Initialise the Keithley board and object
else
  invoke(objSS,'SetPretendMode',1)
end;
invoke(objSS,'SetMSPerSample',2); %Set StartExperiment routines’ sampling

(2) You'll then see a warning message when you get to the "StartExperiment" command, to which you should click "OK". If you're using the PsychToolbox and have already set up the screen, make sure that you only use the HideCursor command after the StartExperiment command, otherwise you won't be able to click OK.

If you would like to use the button box in the practice room of the Scanner building, you will need this code instead to make the button box work:

pretendmode=1;
% Create & initialise scanner sync object
objSS=actxserver('MRISync.ScannerSync');  %Create a scanner object
if (~pretendmode)
  invoke(objSS,'Initialize','') %Initialise the Keithley board and object
else
  invoke(objSS,'SetPretendModeExtended',1,0)
  invoke(objSS,'Initialize','') %Initialise the Keithley board and object
end;
invoke(objSS,'SetMSPerSample',2); %Set StartExperiment routines’ sampling

Collecting Responses

To collect responses in matlab using the button box add a code similar to this:

 tic
 resp=0;
 gotresp=false;
   while toc<rt_window
      if (~gotresp)
         resp=bitand(30,invoke(objSS,'GetResponse'));
         if (resp==samekey || resp==diffkey)
            gotresp=true;
         end;
       end;
    end;

This will collect the responses made by the subject during a pre-defined time interval (rt_window). You can also need to define which buttons the subject should press (in this example they are called samekey and diffkey). The codes returned by pressing the buttons are 28, 26, 22, 14 (i.e. when the right hand is placed on the button box and the subject used his index finger the code returned will be 28).

The GetResponse() function will by default only return first four button presses. If there is a need to use more than 4 buttons one could use GetResponseExtended() or ReadPIOValue(). The example below uses the latter function and ignores responses 254 and 255, which relate to no-response events.

 tic
 resp=0;
 gotresp=false;
 while toc<rt_window
    if (~gotresp)
       resp=invoke(objSS,'ReadPIOValue');
       if isempty(intersect([255,254],resp))
          gotresp=true;
       end;
    end;
 end;

Collecting Response Times

To collect RTs you could try the following:

resp=0;
gotresp=false;
respstarttime=invoke(objSS,'SSGetTimer');
tic
   while toc<rt_window
      if (~gotresp)
         resp=bitand(30,invoke(objSS,'GetResponse'));
         if (resp==samekey || resp==diffkey)
            rt=invoke(objSS,'SSGetTimer')-respstarttime; %or alternatively you can set rt=toc
            gotresp=true;
         end;
       end;
    end;

CbuImaging: ScannerSyncMatlab (last edited 2015-08-28 14:58:08 by RussellThompson)